Converting
from MouseTracker 1.x
Both the experiment .CSV files and the .MT data files are
slightly different in MouseTracker 2.0. But it's not at all hard
to get them up-to-speed with 2.0.
To convert an experiment .CSV file from 1.x to 2.0, simply load
it in the new Designer program. It will recognize that
it's from an older version and ask you if you'd like to convert.
Simply say 'Yes'. Then, save it as a new .CSV file. To know more
about the format of .CSV files in 2.0, check out Creating
experiments.
To convert .MT data files to 2.0 so they may be read into
Analyzer, simply load them using Analyzer. It will
recognize that they're from an older version and ask if you'd
like to convert. It will then ask you to locate your
already-converted-from-1.x-to-2.0 .CSV file (see above). Once
you locate, the .MT data files will work just fine. The .MT data
files are not actually edited, however, so with old 1.x .MT
files, you'll have to do this extra step each time you want to
analyze them. However, for future data in 2.0, you won't need to
do this conversion or locate the experiment .CSV file.